B+B SmartWorx V3, Configuration Manual

Page: 10 / 112

1. BASIC INFORMATION
1. Basic Information
Cellular routers SPECTRE v3 LTE are designed for communication in mobile networks
using LTE, HSPA+, UMTS, EDGE or GPRS technology. Data transfer speed is up to 100 Mbit/s
(download) and up to 50 Mbit/s (upload). The router is an ideal solution for wireless connection
of traffic and security camera systems, individual computers, LANs, automatic teller machines
(ATM), other self-service terminals, etc.
Standard equipment of the router: Two Ethernet 10/100 ports, one USB 2.0 Host port,
two binary inputs and one output (I/O connector). Two readers for 3 V and 1.8 V SIM cards,
memory card reader for microSD cards – maximum capacity of inserted card can be 64 GB
(32 GB in case of SDHC cards).
Optional equipment of the router: The router can be equipped with WiFi module on
customer’s request (it is not possible to add it to the router later in the future). Other pos-
sible interfaces are: Three ports SWITCH, serial line RS232, combined serial line RS232-
RS485/422. Router is supplied either in a plastic or metal casing, based on the requirements
of the customer. For details see the router’s Technical manual.
Configuration possibilities: Statistics about the router activities, signal strength, detailed
system log, etc. Creation of VPN tunnels using technologies IPSec, OpenVPN and L2TP for
secure communications. Functions such as DHCP, NAT, NAT-T, DynDNS, NTP, VRRP, control
by SMS, backup primary connection and many other. Automatic check of PPP connection
offering an automatic restart feature in case of connection fail, hardware watchdog monitoring
the status of the router. It’s possible to insert Linux scripts for various actions. Several different
configurations for one LTE wireless router and the option to switch between them (e.g. via
SMS, binary input status, etc.). Automatic upgrade configuration and firmware update from
server. This allows mass reconfiguration of many routers at one time.
Ways of configuration:
Routers can be configured via web browser or Secure Shell
(SSH). Configuration via Web Browser is described in this Configuration Manual. Commands
and scripts applicable in configuration via SSH are described in Commands and Scripts for
v2 and v3 Routers – Application Note [1]. The standard and optional equipment and technical
parameters of your router can be found in User’s Manual of your router. You can use additional
software – communication VPN server SmartCluster [2] and software for router monitoring
R-SeeNet [3, 4].
This Configuration Manual describes:
• Configuration of the router item by item according to the web interface (chapters 3 to 6).
• Examples of these typical configurations of the router (chapter 7):
– Access to the Internet from LAN (Local Area Network) via mobile network
– Backed up access to the Internet (from LAN)
–
Secure networks interconnection or using VPN (Virtal Private Network)
– Serial Gateway (connection of serial devices to the Internet)
1