2. ACCESS TO THE WEB CONF.
The left part of the web interface contains the menu with sections for monitoring (
Status
),
Configuration
,
Customization
and
Administration
of the router.
Name
and
Location
items in the right upper corner displays the name and location of the
router filled in the SNMP configuration (see SNMP Configuration).
For increased safety of the network managed by the router, the default router password
must be changed. If the router’s default password is set, the
Change password
item is
highlighted in red.
After green LED starts to blink it is possible to restore initial settings of the router by press-
ing button RST on back panel. If RST button pressed, configuration would restore to default
and the router would reboot (green LED would be on).
2.1
Preventing the domain disagreement message
Since the domain name in the certificate is the given MAC address of the router, it is
necessary to access the router via this domain name (use dash separators instead of colons).
To enable this, add a DNS record in your DNS system:
•
Edit /etc/hosts (Linux/Unix OS)
•
Edit C:\WINDOWS\system32\drivers\etc\hosts (Windows OS)
•
Configure your own DNS server
To access the router with MAC address 00:11:22:33:44:55 securely, type the address
https://00-11-22-33-44-55 in the web browser. When accessing for the first time, it will be
necessary to install a security certificate.
If using self signed certificate, the files https_cert and https_key has to be uploaded into
/etc/certs directory of the router.
3
Summary of Contents for V3
