B+B SmartWorx V3, Configuration Manual

Page: 22 / 112

3. STATUS
Continued from previous page
Item Description
TX
•
packets – transmit packets
•
errors – number of errors
•
dropped – dropped packets
•
overruns – outgoing packets lost because of overload
•
carrier – wrong outgoing packets with errors resulting from the
physical layer
collisions Number of collisions on physical layer
txqueuelen Length of front network device
RX bytes Total number of received bytes
TX bytes Total number of transmitted bytes
Table 12: Description of Information in Network Status
It is possible to read status of connection to mobile network from the network information.
If the connection to the mobile network is active, it will be shown in the system information as
an usb0 interface. At the bottom, there is the Route Table displayed.
Figure 5: Network Status
13