B+B SMARTWORK SPECTRE V3, Configuration Manual

Page: 93 / 136

4. CONFIGURATION
Continued from previous page
SMS Description
set profile std Sets the standard profile
set profile alt1 Sets the alternative profile 1
set profile alt2 Sets the alternative profile 2
set profile alt3 Sets the alternative profile 3
reboot The router reboots
get ip The router responds with the IP address of the SIM card
Table 58: Control SMS
Choosing Enable AT-SMS protocol on expansion port 1 and Baudrate makes it possible to
send/receive an SMS on the serial Port 1.
Item Description
Baudrate Communication speed on the expansion port 1
Table 59: Send SMS on the serial Port 1
Choosing Enable AT-SMS protocol on expansion port 2 and Baudrate makes it possible to
send/receive an SMS on the serial Port 2.
Item Description
Baudrate Communication speed on the expansion port 2
Table 60: Send SMS on the serial Port 2
Setting the parameters in the Enable AT-SMS protocol over TCP frame, you can enable
the router to send and receive SMS messages on a TCP port. This function requires you to
specify a TCP port number. The router sends SMS messages using a standard AT command.
Item Description
TCP Port TCP port on which will be allowed to send/receive SMS messages.
Table 61: Send SMS on ethernet PORT1 configuration
4.19.1 Sending SMS
If you establish a connection to the router using a serial interface or Ethernet, then you can
use AT commands to manage SMS messages. The following table lists only the commands
that the router supports. For other AT commands the router sends an
OK
response. The
router sends an ERROR response for complex AT commands.
84