B+B SMARTWORK SPECTRE V3, Configuration Manual

Page: 23 / 136

3. STATUS
3.5 Network Status
To view information about the interfaces and the routing table, open the Network item in
the
Status
menu. The upper part of the window displays detailed information about the active
interfaces only:
Interface Description
eth0, eth1, eth2 Network interfaces (Ethernet connection)
usb0 Active PPP connection to the mobile network – wireless module is con-
nected via USB interface
wlan0 WiFi interface
ppp0 PPP interface (e.g. PPPoE tunnel)
tun0 OpenVPN tunnel interface
ipsec0 IPSec tunnel interface
gre1 GRE tunnel interface
lo Local loopback interface
Table 12: Description of Interfaces in Network Status
Each of the interfaces displays the following information:
Item Description
HWaddr Hardware (unique) address of networks interface
inet IP address of interface
P-t-P IP address second ends connection
Bcast Broadcast address
Mask Mask of network
MTU Maximum packet size that the equipment is able to transmit
Metric Number of routers, over which packet must go trought
RX
•
packets – received packets
•
errors – number of errors
• dropped – dropped packets
• overruns – incoming packets lost because of overload
• frame – wrong incoming packets because of incorrect packet size
Continued on next page
14