B+B SMARTWORK SPECTRE V3, Configuration Manual

Page: 42 / 136

4. CONFIGURATION
If you select none from the Backup SIM card drop down list, then the following parameters
cause the router to go into the off line mode:
• Switch to other SIM card when connection fails ,
•
Switch to backup SIM card when roaming is detected and switch to default SIM card
when home network is detected
,
•
Switch to backup SIM card when data limit is exceeded and switch to default SIM card
when data limit isn’t exceeded
.
Item Description
Switch to other SIM card when
connection fails If the connection to mobile network fails, the router will
switch to the secondary SIM card or secondary APN
of the SIM card. The router will switch to the backup
SIM card if the router is unable to establish a connec-
tion to mobile network after 3 attempts or the Check
the connection to mobile network option is selected
and the router detects that the connection to mobile
network has failed.
Switch to backup SIM card when
roaming is detected and switch
to default SIM card when home
network is detected If roaming is detected, this option forces the router to
switch to the secondary SIM card or secondary APN
of the SIM card. If the home network is detected, this
option enables switching back to the default SIM card.
For proper operation, it is necessary to enable
roaming on your SIM card!
Switch to backup SIM card when
data limit is exceeded and switch
to default SIM card when data
limit isn’t exceeded This option enables the router to switch to the sec-
ondary SIM card or secondary APN of the SIM card
when the data limit of default APN is exceeded. This
option also enables switching back to default SIM
card, when data limit is not exceeded.
Switch to backup SIM card when
binary input is active switch to
default SIM card when binary in-
put isn’t active This parameter forces the router to switch to the sec-
ondary SIM card or secondary APN of the SIM card
when binary input ’bin0’ is active. If the binary input
isn’t active, this option enables switching back to the
default SIM card.
Switch to default SIM card after
timeout This parameter defines the method the router will use
to try to switch back to the default SIM card or de-
fault APN. This parameter defines the method, how
the router will try to switch back to default SIM card or
default APN.
Table 24: Switch between SIM Card Configurations
33