Aztech NETCARD AZ-NC2100, User Manual

Page: 25 / 49

25
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Chapter 4 — Installing the Network Card Drivers
4.7 For Novell Netware 3.12
Location of Driver: \NETWARE\NWSERVER\312\RTSSRV.LAN
Installation Procedure:
Before you start with the installation process, make sure that the Novell NetWare
v3.12 server is properly installed. Similarly, your network card should also be
properly installed in your server.
1. These files can be obtained from the NetCard Installation CD
D:\NETWARE\NWSERVER\312 .
(Assuming that your CD-ROM drive is D. Else, substitute the drive letter accordingly.)
NBI31X.NLM
MSM31X.NLM
ETHERTSM.NLM
2. If you can logged in as a supervisor, copy RTSSRV.LAN relative files from
the NetCard Installation CD \NETWARE\NWSERVER\312 into the
NetWare 386 subdirectory SYSTEM of your server. (If some files exists,
rename the existing files in the SYSTEM subdirectory.)
3. When the NetWare server prompt appears (indicated by a colon), load your
server driver. Simply type:
: LOAD NBI31X <Enter>
: LOAD RTSSRV <Enter>
or, you can directly load file from the NetCard Installation CD :
: LOAD D:\NetWare\NwServer\312\NBI31X <Enter>
: LOAD D:\NetWare\NwServer\312\RTSSRV <Enter>
4. Bind IPX to the adapter driver. At the NetWare server prompt ,type:
:BIND IPX TO RTSSRV <Enter>
5. After pressing < Enter >, the computer will prompt you for the Network
Number. For details on how to assign this number, please refer to your
NetWare Server Installation Manual.
6. Add the load and bind statements you required to the server's
AUTOEXEC.NCF file so that the LAN driver will load automatically each
time the server starts up.