Aztech NETCARD AZ-NC2100, User Manual

Page: 34 / 49

34
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Chapter 4 — Installing the Network Card Drivers
4.11 Microsoft Network Client 3.0 for MS-DOS
Location of Driver: NDIS2\NDIS2DOS\RTSND.DOS
Sample Configuration Files:
Ex1: [PROTOCOL.INI] (install creates this file)
[network.setup]
version=0x3110
netcard=RTL8139,1,RTL8139,1
transport=ms$ndishlp,MS$NDISHLP
transport=ms$netbeui,MS$NETBEUI
lana0=RTL8139,1,ms$netbeui
lana1=RTL8139,1,ms$ndishlp
[protman]
DriverName=PROTMAN$
PRIORITY=MS$NDISHLP
[MS$NDISHLP]
DriverName=ndishlp$
BINDINGS=RTL8139
[MS$NETBEUI]
DriverName=netbeui$
SESSIONS=10
NCBS=12
BINDINGS=RTL8139
LANABASE=0
[RTL8139]
; RTL8139 RPOTOCOL.INI SAMPLE
DriverName=RTSND$
EtherID=@52544C111111 ; This keyword is used to desinate a NetCard
; adapter by assigning its ethernet ID when more
; than one adapters exist on one system.
BusNo=@00 ; This keyword is used to desinate a NetCard adapter
; by assigning it's PCI bus number when more than
; one adapters exist on one system.(must be used with
; 'DeviceNo' keyword)