Aztech NETCARD AZ-NC2100, User Manual

Page: 31 / 49

31
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Chapter 4 — Installing the Network Card Drivers
4.10 For Novell Client32
Location of Driver: \NETWARE\CLIENT32\RTSSRV.LAN
Sample Configuration Files:
STARTNET.BAT (Client 32 for DOS will contain):
C:\NOVELL\CLIENT32\NIOS.EXE
LOAD C:\NOVELL\CLIENT32\LSLC32.NLM
LOAD C:\NOVELL\CLIENT32\CMSM.NLM
LOAD C:\NOVELL\CLIENT32\ETHERTSM.NLM
LOAD C:\NOVELL\CLIENT32\RTSSRV.LAN FRAME=ETHERNET_802.2
LOAD C:\NOVELL\CLIENT32\RTSSRV.LAN FRAME=ETHERNET_802.3
LOAD C:\NOVELL\CLIENT32\RTSSRV.LAN FRAME=ETHERNET_II
LOAD C:\NOVELL\CLIENT32\RTSSRV.LAN FRAME=ETHERNET_SNAP
4.10.1 Driver Installation Procedures on Client32 for DOS :
1. If you have completed installing the Netware Client 32 for DOS, all you
have to do is to modify STARTNET.BAT . Please see the Sample
Configuration Files STARTNET.BAT above. If not, follow steps 2 to 7.
2. Run INSTALL.EXE from Netware Client 32 for DOS diskette 1 (or from
Netware 4.11 CD). When the product manual appears, mark the "Netware
Client 32 for DOS" item, then press < Enter >.
3. Select " OTHER DRIVERS " item from " 32-bit Network Board Drivers " menu
and press < Enter >.
4. Place the NetCard Installation CD and specify the driver path.
5. Select " Realtek Fast Ethernet driver " and press < Enter >.
6. Follow the on-screen instructions to complete the Client32 for DOS
software installation.
7. Reboot your machine.