Aztech NETCARD AZ-NC2100, User Manual

Page: 41 / 49

41
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Chapter 4 — Installing the Network Card Drivers
4.14 For SCO Unix 5.x
Location of Driver: \SCO\5.X\8139.VOL
Before you start with the installation process, make sure that the SCO UNIX
system is properly installed. Similarly, your network card should also be properly
installed in your machine.
1. Installation Diskette in DOS format.
Place the
NetCard Installation CD to your CD-ROM Drive and use doscp
command to copy RTL SCO UNIX PCI Driver into UNIX’s directories.
(Assuming that your CD-ROM drive is D. If not, substitute the drive letter accordingly.)
# cd /
# doscp D:setup /setup
# chmod +x /setup
# ./setup
When the install program ask you for path of the files, key in:
D:/SCO/5.x
2. Run ‘ custom ’ utility to add RTL8139 driver software to system.
Select the following option:
“Software”
-> “Install New”
-> “From ‘your computer’”
-> ‘MediaImages”
Then enter the directory of driver image(8139.VOL) which should be “/
tmp”
3. Use netconfig utility
Available options:
# netconfig
4. To add adapters, select “ Add New Lan Adapter ” from “ Hardware ”.