Aztech NETCARD AZ-NC2100, User Manual

Page: 33 / 49

33
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Chapter 4 — Installing the Network Card Drivers
4. Click the " System " icon from the Control Panel window.
5. Click the " Device Manager " item.
6. Click the " Network adapter " item from System window.
7. Click the " NetCard Fast Ethernet Adapter " icon from System window.
8. Click Remove and then click OK .
9. Close the opened windows.
4.10.3b Driver Installation on Client 32 for Windows
®
95 :
1. Plug in the NetCard into your PC machine.
2. Power on your computer to bootup Windows
®
95.
3. Windows
®
95 will then prompt for " Realtek Fast Ethernet Adapter " in
New Hardware Found dialog box.
4. Following instructions to complete the installation. Window
®
95 will ask
for the proper path of the following diskette:
a. Netware Client 32 for Windows 95 Disk.
b. NetCard Installation CD.
Insert the diskette and assign the path to
D:\NETWARE\CLIENT32 .
(Assuming that your CD-ROM drive is D. If not, substitute the drive letter
accordingly.)
c. Windows 95 CD-ROM