23
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
Chapter 4 Installing the Network Card Drivers
4.6.1 Setup Procedures for NetWare 3.11/3.12 Client
1.
Copy
RTSODI.COM
from the NetCard Installation CD
:
\NETWARE\DOSODI
to your harddisk.
2.
Create a batch file, or add to your
STARTNET.BAT
file the commands
listed above under
STARTNET.BAT
.
3.
Edit the
NET.CFG
file that you copied over. Edit the file according to your
requirements (see
Sample Configuration Files
). If there are two frame types
listed, the first one listed will be the one that the driver will load. See
Sample
Configuration Files
. The
NET.CFG
file should be in the same directory
with the
LSL.COM file
.
4.6.2 Setup Procedures for NetWare 4.X Client with vlm:
The installation utility
INSTALL.EXE
is located on NetWare's "
Workstation for
DOS
" disk. Run
INSTALL.EXE
from the Workstation for DOS Disk.
The NetWare Client Install program screen will appear. You must complete all
the questions. The options are specific to your needs.
1.
Enter the
destination directory
for the NetWare Client. (The default
directory is C:\NWCLIENT).
2.
Choose to either
automatically update
the
CONFIG.SYS
and the
AUTOEXEC.BAT
files or
modify them manually
at a later stage.
3.
When prompted
Do you wish to install support for MS Windows? (Y/
N)
, type in
Y
for
Yes
or
N
for
No
.
(MS Windows Subdirectory: default C:\WINDOWS)
4.
Select a
network driver
and the configuration options. System will use the
options you have selected to create
NET.CFG
file.
Insert the
NetCard Installation CD
when prompted for the driver disk
and specify the driver path
D:\NETWARE\DOSODI
.
(Assuming that your CD-ROM drive is D. If not, substitute the drive letter accordingly.)
5.
Press <
Enter
> to install.
