Azbil MVC10A, User Manual

Page: 4 / 64

Preface Azbil Corporation
ii Model: MVC10A/10F - Multivariable Air Flow Meter
Unpacking and inspection
Unpacking
This flow meter is a precision instrument. When unpacking, handle it with care to
prevent accidents or damage. Check that the following items are contained:
Waterproofing gland and gasket 3 pieces each
Blind plug 2 pieces
Remote type kit (for MVC10F only) 1 set
Bracket for remote type model 1 set
Tube for remote type model 1 tube
Tube fitting 1 set
User's manual --
Test report (issued only when specified) --
Verifying the specifications
The specifications for this device are written on the nameplate attached to the case of
this instrument. Verify that all the specifications on the nameplate are correct paying
special attention to the following:
• Basic model number
• Diameter
• Mounting/flow direction
Only if you have specified Tag No., verify the Tag No. checking Tag No. plate on the
side of the case.
Inquiries
If you have any questions regarding the specifications, contact our branch and sales
representative offices and your local Azbil Corporation distributor. When making an
inquiry, be sure to let us know the Model and Product Nos. of the product you have
purchased.
Storage precautions
When storing this instrument in the condition in which it was purchased, observe the
following instructions:
• Store the instrument indoors at room temperature and humidity (around 25°C, RH
65%)
• Store it in a place safe from vibration or shocks.
• Store it in the same packaging conditions as it was shipped in.
When storing this instrument after usage, observe the following instructions:
1. Tighten the converter and waterproofing gland so that moisture infiltration can be
prevented.
2. Return the instrument to its original packaging conditions.
3. Store the instrument indoors at room temperature and humidity in a place free
from vibration and shocks.