Azbil MVC10A, User Manual

Page: 34 / 64

Setting parameters and operating the local data setting device Azbil Corporation
4-6 Model: MVC10A/10F - Multivariable Air Flow Meter
4-5: Configuration of the “Basic menu”
Configuration of the “basic menu”
Pressing the [Menu] key (M) once causes the “BASIC MENU” to appear. Pressing
the key once causes “1 <Main Disp>” to appear. Bringing the cursor to the
displayed value and pressing the or key allow you to switch the items. The
configuration of the “BASIC MENU” is shown below. To terminate the “BASIC
MENU,” press the [Menu] key (M) or [Disp.] (D) key.
1 <Main Disp>
Select the main display.
Select the unit for each value.
3 <Damping Time>
Sets the damping.
4 <Low Flow Cat>
Sets the low flow cut.
Displays and sets a leak rate.
5 <Leak Check>
2 <Unit>
Selects the unit for a totalized flow rate.
1 <Total Volume>
Selects the unit for an instantaneous
flow rate.
2 <Flow Rate>
Selects the unit for a totalized cost value.
3 <Total Cost>
Selects the unit for an instantaneous
cost value.
4 <Cost>
Displays a leak rate.
1 <Leak Rate>
Resets measured data.
2 <Reset OK?>
Sets a compressor pressure.
3 <Set Press>