Azbil MCB10A, User Manual

Page: 96 / 114

Operation using the data setting device Azbil Corporation
5-48 Model MCB10A
5-7-5 : Configuration of CALIBRATION MODE
Introduction
CALIBRATION MODE has the following setting and adjustment items:
Configuration of CALIBRATION MODE requires a dedicated calibrator.
Wrong operation may hinder accurate measurements of the flow rate. To operate in
this mode, contact an Azbil Corp. representative.
Item Content Screen
CAL I.OUT Adjusts 4 mA analog
current output.
12.3 %
> CAL I.OUT OFF
LOW 4.000 mA
LOW 4.000 mA
CAL I.OUT Adjusts 20 mA analog
current output.
12.3 %
> CAL I.OUT OFF
HIGH 20.000 mA
HIGH 20.00 mA
CAL P.OUT Adjusts 90 Hz pulse
output.
12.3 %
> CAL P.OUT OFF
FREQ 90 Hz
FREQ 90 Hz
CAL GAIN Adjusts 0 m/s gain.
12.3 %
> CAL GAIN OFF
ZERO READY
ZERO
CAL GAIN Adjusts 5 m/s gain.
12.3 %
> CAL GAIN OFF
5.0 m/s READY
5 m/s