Azbil MCB10A, User Manual

Page: 70 / 114

Operation using the data setting device Azbil Corporation
5-22 Model MCB10A
5-6 : Configuration of ENGINEERING MODE
Introduction
ENGINEERING MODE has the following setting and adjustment items:
For details on items, see “5-6-1 : Setting IDˮ to “5-6-14 : Setting contact output
statusˮ.
Item Contents Screen
ID SET Sets ID and TAG No.
20.0 %
# ID SET
XXXXXXXX
FUNC SET Setting of open collector
output, selects pulse output or
contact output.
20.0 %
# FUNC SET
PULSE
EX, DIA Sets the detector information
(Ex value and bore diameter).
20.0 %
#
MCB DIA 200
EX 300.0
SPAN Sets the flow rate range.
20.0 %
#
SPAN 7.0690 m 3 /h
1.0000 m/s
GRAVITY Sets the specific gravity when
mass flow rate unit is selected.
20.0 %
# GRAVITY
1.0000
COEFFICIENT Sets a compensation
coefficient for flow rate
calculation.
20.0 %
# COEFFICIENT
1.0000
PLS SCL Sets flow rate (pulse scale) per
pulse.
20.0 %
# PLS
200.00 l/P
10.000 Hz
SCL
PLS WID Sets the output pulse width.
20.0 %
# PLS
0010 ms
10.000 Hz
WID