Azbil MCB10A, User Manual

Page: 54 / 114

Operation using the data setting device Azbil Corporation
5-6 Model MCB10A
This section describes keys on the data setting device.
Name Description
MODE key • Enters OPERATOR'S MODE.
• When parameters and configured data have
been changed in ENGINEERING MODE or
MAINTENANCE MODE, press this key to save the
data.
Right shift key • Moves the cursor to the right.
Decrement key • Changes the parameter at a cursor position.
•
Displays the previous screen.
* OPERATOR'S
MODE
Cursor
If the key is pressed, when
the cursor is placed at the
upper left end (*, #, >),
the screen will change.
* DAMPING
001.0 S
Cursor
If the key is pressed, when
the cursor is placed at a
number, the number is
decremented.
# 1.0000 m/s
SPAN 07. 069 m
3 /h
Cursor
If the cursor is placed at a
decimal point, the decimal
point moves rightward.
Increment key • Changes the parameter at a cursor position.
•
Displays the following screen.
* OPERATOR'S
MODE
Cursor
If the key is pressed, when
the cursor is placed at the
upper left end (*, #, >),
the screen will change.
* DAMPING
001.0 S
Cursor
If the key is pressed, when
the cursor is placed at a
number, the number is
incremented.
# 1.0000 m/s
SPAN 07. 069 m
3 /h
Cursor
If the key is pressed, when
the cursor is placed at a
decimal point, the decimal
point moves to the left.
* AUTO ZERO
READY
Cursor
If the cursor is placed over
READY, pressing the key
starts operation.