3-3
Chapter 3. HOW TO USE THE LOADER
In order to check or change the data on the device, the loader must first be connected to the device.
The procedure for connection is as follows.
Steps 1–2: Connect the PC to the device.
Step 3: Start the loader.
Steps 4–5: Set the communication conditions.
Steps 6–8: Execute “Activate comm.”
Handling Precautions
•
After the above procedure, a different device can be connected without
exiting the loader. To do so, change the device that is connected to the PC, and
activate communication with the device using steps (6)–(8).
Procedures for device connection
In order to connect the loader to the device, it is necessary to specify
communication settings for the loader and activate communication with the device.
(1) Turn the device off.
(2) Connect the device to the PC.
(3) Start the loader.
(4) Select
[Comm. (E) ]
→
[Comm. settings]
on the menu bar, or click the
button on the toolbar.
>> The following screen is displayed.
3 - 2
Connecting the Loader to the Device
