1-4
Chapter 1. INTRODUCTION
Note
•
It is also possible, without using cable B, to directly connect the adapter for loader
communication cable to the cable removed from the waterproof connector on the
device.
Handling Precautions
•
To use loader communications, remove the cable from the device waterproof
connector and connect it to the adapter for loader communication cable.
•
When handling the cable, make sure that the electrodes of the connector are
free from water drops and dust. Otherwise, a failure or abnormal output might
result. Also, be sure to turn off the device before removing or connecting the
connector. Otherwise, the device or the adapter for loader communication
cable may fail, and the power supply for the equipment may fail or catch fire.
•
The adapter for loader communication cable is not water resistant. Water
drops or dust entering inside or accumulating around the electrodes may
damage the device or the adapter, or may cause external devices to catch fire
or fail.
•
After using loader communications, remove the cable for the device
waterproof connector from the adapter for loader communication cable,
and insert it all the way into the waterproof connector. If the cable is not
inserted properly, the device's water resistance will be impaired, the device or
connected equipment may fail, and the connected equipment may catch fire.
•
Application of excessive force to the plug of the USB loader cable might
interfere with communications. If this happens, reconnect the plug correctly
and restart communications.
z
Separately sold products
•
Adapter for loader communication cable (
F9Y7A1
)
•
USB loader cable (
81441177-001
)
•
Cable (
F9Y7H_1
)
*
* The underscore represents a digit that tells the material of the cable.