31
Fig.5-2 Connecting function blocks with the aid of the “NI-FBUS Configurator”
Example: Averaging(output OUT in the Input Selector Block) of two
temperature inputs (OUT in the Analog Input Blocks 1 and 2).
19. Once you have specified the active LAS (
→
page 20) download all the data and
parameters to the field device.
20. Set the operating mode in the MODE_BLK parameter group (TARGET parameter) to
AUTO. This is only possible, however, under two conditions:
- The function blocks are correctly connected to one another.
- The Resource Block is in the AUTO operating mode.
