Viewing the Status of a Neurostimulator
45
Active Therapy (
③
)
: This area shows the current
stimulation settings for the therapy programmed to the
Neurostimulator.
Additionally, the active stimulation settings can be
adjusted in the
Stimulation Control Module (
④
)
. This
1
3
area is intended for basic adjustments to the stimulation
being delivered. It is not intended for reprogramming.
2
Controls in this module include:
•
“
Stimulation Level
”:
Increase or decrease the
stimulation level. This allows control of the stimulation
4
level as the patient would with their patient Remote
Control. Possible levels range from 1-7.
•
“Stimulation”: Turn stimulation on or off. If stimulation
is turned on, it will come on at the stimulation level
shown below the “Stimulation” button.
•
“
Hibernate”: Put the device in “Hibernate Mode.”
Note:
The CP, including this button, cannot be used to
bring a device out of Hibernate Mode. For more
information see the following manual section on
Hibernate Mode
.
Additional information can be accessed via the “Therapy
History”
(
⑤
)
and “Threshold Detail”
(
⑥
)
tabs on the
Patient Device
screen.
