Assembly
10
Mounting the Saw Bench to the Stand
1). With assistance, place the Saw
Bench (A) onto the stand. Align the four
mounting holes at the base of the Saw
Bench with the four mounting holes at
each corner of the stand. Using four M8
x 16mm hex bolts, large washers & nuts (L2) secure
the Saw Bench to the stand, see figs 05-06-07.
Fig 05
Fig 06-07
L2
2). Now tighten all the nuts on the stand assembly.
Optional Sliding Carriage Table (Kit Code 508214)
1). Position one carriage support arm (V) to the
underside of the cast iron saw bench (A), line up
the clearance holes (a) in the support arm with the
pre-drilled holes in the table, using four M6 x 45mm
countersink heads and nuts, (W2) secure the support
arm to the table using a 4mm Hex key (G4), see figs
08-09-10. Repeat for the remaining arm.
Fig 08
Fig 09-10
a
W2
V
Pre-drilled holes
2). Place an M6x16mm Hex bolt (W3) in each of the
four clearance holes on both support arms (V) and
loosely screw on an M6 nut and washer, see fig 11.
3). Locate the four M6x30mm Hex Bolts (W1) and
lightly screw each bolt into the threaded holes to
the underside of the carriage arm (X), see fig 12.
V
Summary of Contents for Hobby series TS-250M
Page 28: ...Parts Breakdown List 28...
Page 30: ...Parts Breakdown List 30...
