Section 4: NetWare (NCP)
AXIS StorPoint CD E100 User’s Manual
69
5. Click
Drive Connections
. Double click AXIS<nnnnnn>_NW\SYS and then
open the VOLUMES folder.
Note:
If the
Show All Volumes
parameter is set to yes, the individual discs are
shown at the same level as SYS. Some applications will not run properly
unless the data is stored at root level. To avoid such problems, assign a drive
letter to that particular disc.
6. Select a drive letter in the
Drives
listing.
7. In the
Resources
listing, select a StorPoint CD resource:
• AXIS<nnnnnn>_NW\SYS for root level access
• VOLUMES for access to all the discs
• the volume name for access to an individual disc, e.g. OFFICE
8. Click
Map
to map the StorPoint CD to the selected drive letter.
9. Click
Permanent
if you wish to use the resource under the same drive letter
the next time you start you computer.
Click the
Exit
button on the toolbar. The StorPoint CD is ready for use.
