Appendix B: Troubleshooting
AXIS StorPoint CD E100 User’s Manual
125
Config.ini
To restore the defaults settings using the
config.ini
file:
1. Locate the
config.ini
file using your standard file manager tool. You will
find it in the
Root/System/ServerProperties
folder.
2. Use your preferred text editor and change the
Factory Defaults
parameter
to
configuration, volumeProperties
or
all
. You will find the
Factory
Defaults
parameter under the
[Server]
section.
3. Change the
Restart
parameter to
yes
. You will find the
Restart
parameter
under the
[Server]
section.
4. Save the
config.ini
file.
The factory default setting will now be restored and the StorPoint CD will
automatically restart.
Push Button
To restore the default settings using the Push button:
1. Shut down the StorPoint CD.
2. Use a thin object, e.g. a pen to press and hold the Push button.
3. Switch on the StorPoint CD.
4. Wait until the Status indicator flashes yellow (one flash/second).
5. Let go of the button at least two seconds.
6. Press and hold the Push button again until the Status indicator shows a steady
yellow light. This may take 5-6 seconds.
7. Restart the StorPoint CD by switching the server off and on. The StorPoint
CD is now reset to factory default settings.
Push button
