Appendix A: Parameter List
AXIS StorPoint CD E100 User’s Manual
113
NTDomainInstallation
= no
Set to
yes
when you want to install the StorPoint CD in an NT
domain.
EnableNBT
= yes
Enables SMB over NetBIOS/TCP/IP.
NBTscopeID
=
Defines the NetBIOS scope to which the StorPoint CD belongs.
EnableNetBEUI
= yes
Enables SMB over NetBIOS/NetBEUI.
NetBEUIFrameType
= auto
If set to
auto
, 802.2 or DIX will automatically be selected by
scanning the network. If required, the frame type can also be set to
either
802_2
or
dix
.
[NFS]
NFSEnable
= yes
Enables NFS.
DefaultUid
= -2
Default user id to be used when authenticating PCNFSD clients.
Disable by setting the parameter to
0
(zero).
PCNFSDAuthentServer
= 0.0.0.0
The IP address of the PCNFSD authentication server used for
authenitcating PCNFSD clients. The default
0.0.0.0
disables the
function.
ExportVolumes
= yes
Enables export of each new disc inserted as a mount point. If you
restore the factory default settings, all the currently inserted discs
will be exported.
LowerNonCase
= yes
Set to
yes
to displays non-case sensitive file systems in lower case.
[SNMP]
GetCommunityName
= public
Specifies the community that has read only access to all supported
SNMP objects except writeCommunity, SupervisorPassword and
ftpPassword. It corresponds to the readCommunity SNMP object.
TrapDestination
= 0.0.0.0
Specifies the IP address which SNMP traps are sent to. It
corresponds to the trapAddress SNMP object. Default is
0.0.0.0
,
i.e. all SNMP traps are disabled.
TrapCommunityName
= public
Specifies the community for all generated SNMP traps. It
corresponds to the trapCommunity SNMP object.
SystemContact
=
Optional entry which should be in plain text and may be used to
show the name of the system contact person.
SystemName
=
Optional entry which should be in plain text and may be used to
show the name of the location of the system.
SystemLocation
=
Optional entry which should be in plain text and may be used to
show the name of the location of the system.
AuthenticationTrap
= disabled
Disables the SNMP authentication failure traps. It corresponds to
the snmpenableAuthenTraps (MIB-II) SNMP object.
[NetWare]
NWEnable
= yes
Enables NetWare support.
IPXEnable
= yes
Enables the IPX protocol.
Frame_802.2
= auto
Enables the 802.2 frame type.
Frame_802.3
= auto
Enables the 802.3 frame type (Ethernet versions only).
Frame_EthernetII
= auto
Enables the Ethernet II frame type (Ethernet versions only).
Frame_SNAP
= auto
Enables the SNAP frame type.
NetWareIP_Enable
= no
Enables NCP over IPX/UDP (NetWare/IP).
NetWareIP_DSS_Server
=
The IP address of the DSS server.
PureIPEnable
= yes
Enables NCP over TCP/IP (PureIP).
ServerName
= AXIS<nnnnnn>_NW
NetWare server name to be presented to the NetWare clients.
Default is AXIS<
nnnnnn>
_NW where
nnnnnn
are the last six digits
of the serial number.
InternalNetAddress
= nn-nn-nn-nn
Internal network address. Default is
nn-nn-nn-nn
where
nnnnnnnn
are the last eight digits of the serial number.
BurstMode
= on
Enables burst mode.
ShowAllVolumes
= yes
Shows all drives and discs also at SYS level.
BinderyEnable
= yes
Enables bindery mode login. When using NDS, set to
no
to increase
system security. The Supervisor can always login in bindery mode
even if this parameter is set to
no
.
BindAuthentication
=
Name or IP address of the server used for authenitcating clients.
NDSEnable
= yes
Enables NDS mode.
NDSTreeName
=
Name of the tree where you wish to install the StorPoint CD.
NDSServerContext
=
Distinguished name of the context in the NDS tree where you wish
to install the StorPoint CD, e.g.
Corp.Acme
.
Parameter name
Value
Description