Axis AXIS StorPoint CD, User Manual

Page: 95 / 135

Section 8: StorPoint CD Security System
94 AXIS StorPoint CD User’s Manual
Access restrictions are set individually for each protocol (NetWare,
SMB, NFS, HTTP) through separate settings in the access files. In
some protocols, the default settings give full access rights to all users.
You are therefore recommended to implement at least two access
restrictions:
• Restrict access to the config and volumes directories. For HTTP,
NetWare bindery mode, SMB, SNMP and FTP, you specify a
common Supervisor/Administrator password in the
ServerPassword
parameter. Note that when you install your
StorPoint CD into NetWare NDS, the default settings will
restrict access to both the config and volumes directories.
• Disable all protocols not being used. If unconfigured protocols
are not disabled, any user accessing the server through such a
protocol will be given full access rights, in spite of the security
configurations in other protocols. To disable unused protocols,
you must set the appropriate StorPoint CD configuration
parameters.
The Access Files
There are separate access files for each of the CD-ROM drives, the
CD-ROMs inserted into the drives, and the StorPoint CD’s
configuration files. To set the access rights to any of these volumes,
you need to change the parameter values in the corresponding access
file held in the volumes directory of the StorPoint CD.
The following list describes the parameters stored in the access files.
Not all parameters are used in every access file.
Name
is the volume name, and cannot be changed. If a CD-ROM disc
has no volume name, it will be named
cd_ nnnnn
, where
nnnnn
is a
unique five digit number. The CD-ROM drive name will be
id<x>lun<y>
where
<x>
is the SCSI address and
<y>
the LUN
address.