Axis AXIS StorPoint CD, User Manual

Page: 57 / 135

Section 4: Setting Up - NetWare
56 AXIS StorPoint CD User’s Manual
DOS In DOS, you use the
map
command to mount the StorPoint CD.
Follow these steps:
1. At the DOS prompt of a NetWare file server, type:
map root <drive letter>:=AXIS<nnnnnn>_NW/<path>:
where
<nnnnnn>
are the six last digits of your StorPoint CD serial
number and
<path>
is the path to any StorPoint CD folder or to
a file on an inserted CD-ROM.
2. To make the connections permanent, edit your
autoexec.bat
file
to include your map commands.
Example 1 (root level access):
To access the root level of your StorPoint CD with serial number
00408CCD000B under the drive letter E, type:
Example 2 (cd folder access):
To access all the CD-ROMs of your StorPoint CD with serial
number 00408CCD000B under the drive letter F, type:
Example 3 (CD-ROM access):
If your StorPoint CD serial number is 00408CCD000B, and you
want to map a CD-ROM named cd_18881 to drive G, type:
Note:
❏
If the
ShowAllVolumes
parameter is set to
yes
, individual
volumes can be mapped at
SYS
level. Some CD-ROM
applications will not run properly unless the data is stored at root
level. To avoid such problems, you can map drive G directly to
the CD-ROM named cd_18881. Type:
map root E:=AXISCD000B_NW/SYS:
map root F:=AXISCD000B_NW/SYS:/CD
map root G:=AXISCD000B_NW/SYS:/CD/cd_18881
map root G:=AXISCD000B_NW/cd_18881