Section 5: Setting Up - Microsoft and IBM Networks (SMB)
AXIS StorPoint CD User’s Manual
61
Section 5 Setting Up - Microsoft and IBM
Networks (SMB)
This section includes configuration information for the Microsoft and
IBM Networks environments. It also explains how to access CD-
ROMs using SMB clients, and how to set up SMB access restrictions.
This table outlines the maximum number of SMB users, depending
on the amount of RAM memory installed on your StorPoint CD:
If you intend to use StorPoint CD in a multiprotocol environment,
proceed to the other relevant sections in this manual, namely:
Section 3 - Web browser (HTTP)
Section 4 - NetWare
Section 6 - UNIX (NFS)
Note:
❏
To make the setup of the StorPoint CD as convenient as possible,
use the installation wizards available from the Web browser
interface. You will find a wizard for each network environment on
the Quick Installation page.
Max no of users
2Mbytes
32Mbytes
NetBIOS/NetBEUI
100
200
NetBIOS/TCP/IP
100
300
Summary of Contents for AXIS StorPoint CD
