User Manual UMAX030541. Version V1 86-116
Sub-Index
1h to 6h (x = 1 to 6)
Description
ECx Scaling 2 PV
Access
RW
PDO Mapping
No
Value Range
2520h sub-index X to 32767
Default Value
1000 (100.0)
3.4.22 Object 3yz0h: LTyz Input X-Axis Source
This object defines the type of input that will be used to determine the X-Axis input process
value for the lookup table function. The available control sources on the CAN-4AOUT are
listed in Table 5. Not all sources would make sense to use as an X-Axis input, and it is
the user’s responsibility to select a source that makes sense for the application. A
selection of “Control Source Not Used” disables the associated lookup table function
block.
Object Description
Index
3yz0h (where yz = 01 to 10)
Name
LTyz Input X-Axis Source
Object Type
VARIABLE
Data Type
UNSIGNED8
Entry Description
Sub-Index
0h
Access
RW
PDO Mapping
No
Value Range
See Table 5
Default Value
0 (control not used)
3.4.23 Object 3yz1h: LTyz Input X-Axis Number
This object defines the number of the source that will be used as the X-Axis input PV for
the lookup table function. The available control numbers are dependent on the source
selected, as shown in Table 6. Once selected, the limits for the points on the X-Axis will
be constrained by the scaling objects of the control source/number as defined in Table
16.
Object Description
Index
3yz1h (where yz = 01 to 10)
Name
LTyz Input X-Axis Number
Object Type
VARIABLE
Data Type
UNSIGNED8
