Axiom CNC Series, Assembly Manual

Page: 10 / 29

10
E
NCLOSURE BASE ASSEMBLY
The final step of the setting up the stand assembly is fixing the machine enclosure base to the
stand. To assist with locating the assemblies correctly we have provided 4 x M4x10mm screws
that should be used to help align the enclosure base assembly to the stand assembly (See
Figure 12). If the hole alignments are not correct, we suggest you loosen the bolts on the stand
cross member as per Figure 9 above. Please take note of Figure 14 for orientation.
Figure 12 M4 Locator Screw Figure 13 Base Assembly and stand Alignment
Step 1 is complete when your assembly looks like Figure 14
Figure 14: Final Stand and enclosure base
assembly