Axiom CNC Series, Assembly Manual

Page: 7 / 29

7
2 S
TEP
1
–
S
ETTING UP THE STAND
Failure to read and understand all the assembly and setup instructions before
attempting assembly may result in serious injury.
Once you have verified the machine and their contents are 100% okay and damage
free after transport then you can begin the setup process.
S
TAND
C
ONTENTS
Figure 4 Axiom Stand Packaging Figure 5 Axiom Stand contents
Packaging contents for the Axiom Precision Stand (ARS400/600/800):
2-Stand upright (front & back)
2-Cross braces
1-Lower shelf plate
1-Stand hardware package
Hardware package contains :
4-Swivel casters
4-Leveling Feet
4-hex nuts
16-Hex bolts (M8x25)
16-Lock washers (M8)
16-Flat washer (M8)
16-Hex bolts (M6x12)
16-Lock washer (M6)
16-Flat washer (M6)
1-Controller hook
2-Machine screws (M4x6)
4-Small rubber pads
Figure 6: AXIOM steel stand assembly overview
Figure 7 Hardware package contents