Axiom 606, Owner'S Manual

Page: 9 / 66

5
Important Tips
1. To activate the Heart Rate function (to display heart rate),
press and hold the Mode button in any main screen.
2. To exit any setup screen and return to a main screen,
press and hold the Light button.
3. To advance from one main screen to the next, press the
Mode button.
4. To start the Stopwatch in any main screen, press the Start
Lap button. To stop the Stopwatch in any main screen,
press the Stop/Adj button.
5. Time in zone data accumulates only while the stopwatch is
running. Activate the stopwatch at the beginning of your
workout if you wish to record time in, above and below
zone, and average and maximum heart rate for entire
workout.
6. For heart rate readings to register properly, it is critical
that there be sufficient moisture (water, saliva or Axiom
Heartbeat Signal Enhancer) between the electrodes on the
transmitter (chest strap) and your skin. Insufficient
moisture may cause no reading, a frozen reading or
an erratic reading.
7. Using a wireless heart rate monitor near computers,
motorized gym equipment, electric motors, high voltage
power lines, automobiles, televisions or fluorescent lights
may cause erratic readings.