Axiom 606, Owner'S Manual

Page: 18 / 66

14
minus 5bpm). In the lower right corner of the display, the
lower limit value is displayed as a percentage of maximum
heart rate.
Note: The 606 will automatically compensate to preserve a 5
bpm difference between the upper and lower limits.
3. Press the Start/Lap button again to select the upper limit
value for Target Zone 2. The number “2” and a flashing
upper limit value for Zone 2 will appear in the upper row of
the display. Use the Stop/Adj and Mode buttons to set the
upper limit value.
4. Press the Start/Lap button again to select the lower limit
value for Zone 2. The lower limit value will flash. Use the
Stop/Adj and Mode buttons to set the lower limit value.
5. A further press of the Start/Lap button will advance to the
Recovery Timer Upper and Lower Limits setup screen. Or,
to exit the setup mode, press and hold the Light button.
Note: To activate the Out of Zone Audible Alarm,
see “Alarms,” page 23.
Setting Recovery Timer Limits
See Figure A4 in Appendix.
Note: This setup screen can be accessed at any time from
the Stopwatch (STW) main screen with a long press of the
Start/Lap button, and then six successive short presses of
the Start/Lap button.