Axiom 606, Owner'S Manual

Page: 13 / 66

9
2. Press and hold the Stop/Adj button to select 12 or
24 hour mode.
3. Press and hold the Start/Lap button. “ALM”, alarm time
and a flashing alarm bell icon will appear in the upper
row of the display.
4. Press the Stop/Adj button to turn the alarm on or off.
When the alarm is activated, the alarm bell icon will
appear in the upper row of all main screen displays.
5. Press the Start/Lap button to select hours. The hours will
flash. Short presses of the Stop/Adj button will advance
the hours, while short presses of the Mode button will
decrease the hours. A long press of the Stop/Adj button
will cause the hours to advance rapidly, and a long press
of the Mode button will cause the hours to decrease
rapidly.
6. Press the Start/Lap button again to select minutes. The
minutes will flash. Use the Stop/Adj and Mode buttons to
set the minutes.
7. A further press of the Start/Lap button will advance to the
Time of Day setup screen. Or, to exit the setup mode, press
and hold the Light button.
Setting the Time of Day and Date
See Figure A3 in Appendix.