Axiom 606, Owner'S Manual

Page: 32 / 66

28
main screens (except the Stopwatch main screen, where
it will remain steady).
3. To record the first lap, press the Start/Lap button again.
(Note: this press can be made from any main screen.) One
alarm beep will sound, and the lap time, average heart
rate and maximum heart rate for lap 1 will be recorded
in memory.
4. To record successive laps, press the Start/Lap button.
(Note: These presses can be made from any main screen.)
Each press of the Start/Lap button records the previous
lap in memory and begins a new lap.
5. Each time the Start/Lap button is pressed, the time of the
lap just measured will be displayed in the upper row of
the display, and the number of the lap just measured will
be displayed in the lower row of the display. After three
seconds, the display will revert to main screen data.
6. After the 20th lap has been recorded, “End” will appear
in the lower row of the display, and further presses of the
Start/Lap button will emit no alarm beep. This indicates
that memory is full. The stopwatch will continue to run,
but no additional lap data will be recorded in memory.
Each lap time will be recorded in memory (up to a total of 20
laps), along with average and maximum heart rate values
for each lap (provided the heart rate function is activated),
and total elapsed stopwatch time. To view this data, see
“Viewing Memory Recall Screens,” page 34.