Axiom 606, Owner'S Manual

Page: 33 / 66

29
Reset
1. To reset the Lap Timer and Stopwatch, advance to the
Timer main screen (TMR) using the Mode button.
2. Press and hold the Stop/Adj button.
Note: Resetting the Lap Timer will clear all accumulated lap
recall data from memory and will reset the stopwatch time.
In Interval Mode
To use the Interval Timer, Interval mode must have been
selected in the setup procedure (see “Setting Stopwatch/
Lap/Interval Timers,” page 16).
Note: To operate the Interval Timer, the heart rate function
must be activated (with a long press of the Mode button in
any main screen). Interval Timer and stopwatch operation
are linked.
The interval timer is used to control interval training, by
coordinating a sequence of up to 20 alternating exercise
and recovery phases. Each exercise phase lasts for a pre-
set duration, and is governed by a countdown timer. Each
recovery phase lasts either for a preset
duration, or until a preset recovery heart rate is attained. (To
program the exercise and recovery sessions, see “Setting
Stopwatch/Lap/Interval Timers,” page 16).