Axiom 606, Owner'S Manual

Page: 8 / 66

4
Button Commands and Important Tips
Button Commands
The Axiom 606 is a full-featured heart rate monitor, but
remains simple to use. You need to remember only a few
basic button commands to set or change values and to scroll
through the four main screens (please refer to Figure A1 and
A2 in the Appendix for an overview of screen selection).
Please note that all button presses should be a short press
and release unless otherwise noted.
To advance from one main screen to the next, press the
Mode button. The Mode button will cycle through the four
main screens in the following order: Time of Day, Stopwatch,
Timer, Time in Zone, and back to Time of Day.
To enter Setup mode: Press and hold the Start/Lap button
in any main screen except Time in Zone. To advance from
one setup screen to the next, press the Start/Lap button. To
change the values within each setup screen, press the Stop/
Adj button.
At any point in the setup mode, you may return to the previ-
ous setup screen with a short press of the Light button. The
backlight will not illuminate in any setup screen. To exit the
setup mode and return to one of the four main screens, press
and hold the Light button.
If you accidentally find yourself in a setup screen but don’t
wish to modify the values, simply press and hold the Light
button to exit the setup mode and return to a main screen.