Axiom 606, Owner'S Manual

Page: 47 / 66

43
button to return to the Time in Zone main screen. All data
has been cleared from memory.
Partial Reset
To perform a partial reset (which clears all data from Lap
and Interval recall screens, and resets the Stopwatch and
Timer, but does not clear the Time in Zone recall screens):
1. Stop the stopwatch (if it is running) with a short press of
the Stop/Adj button.
2. Advance to the Timer main screen (TMR).
3. Press and hold the Stop/Adj button. The Timer and
Stopwatch will be reset, and all data in Lap or Interval
recall screens will be cleared. However, Time in Zone
data (time in, above and below zone, average and
maximum heart rate, and recovery time) will remain in
memory.
Backlight
In any main screen, a short press of the Light button will illu-
minate the backlight for four seconds.The backlight will not
illuminate when the Light button is pressed in a setup screen
or to silence an alarm.