Axiom 606, Owner'S Manual

Page: 37 / 66

33
2. Press and hold the Start/Lap button. “ZonE” will appear at
the top of the screen, and “1” or “2” will flash in the lower
row of the display.
3. Toggle between Zone 1 and Zone 2 with short presses of
the Stop/Adj button.
4. Once you have made your selection, press the Light
button to return to the main screen.
Time in Zone
From the Time in Zone main screen, you can view average
and maximum heart rate for the entire workout, and the
amount of time spent above, in and below the preset target
zones. Time is expressed in hours, minutes and seconds,
and also as a percentage of total workout time.
Timing and heart rate calculation begin automatically pro-
vided that the heart rate function and stopwatch have been
activated, and that the receiver is receiving a signal from
the chest transmitter belt.
Time accumulated in the currently selected Target Zone is
displayed in the upper row of the Time In Zone main screen.
To view time above and below zone, see "Viewing Memory
Recall Screens", page 35.
Note: Time in Zone and heart rate data accumulate only
while the stopwatch is running. If the stopwatch is not start-
ed at the beginning of a workout, no data will be recorded in
the Time in Zone recall screens.