2022-01-10 | Technical improvements, changes in design, printing- and other errors reserved. | BA_MIP-8-16-0x.pdf
Page 35 of 48
5.3.2.
Changing the password
The default password is:
Ramsen8262
.
The default password should be changed right after commissioning the device.
Type an new password with 8-10 characters (letters and/or digits).
Re-enter the password.
Click SAVE CHANGES to confirm and save the changes.
When the changes are saved, the frontpage will be shown.
5.3.3.
Device name
In the section DEVICE NAME you can set a new device name.
Enter a name in the field SET NEW DEVICE NAME.
Click on SAVE CHANGES.
The new device name is shown at the login.
5.4.
CONFIG
5.4.1.
Erasing service data
In the section ERASE SERVICE DATA you can erase the settings from phase 2. The transponder data must be read again for
tuners 1-4 by executing a scan.
Click on erase.
The frontpage will be shown.
