axing MIP 16-00, Manual

Page: 64 / 96

Operation instructions | MIP 8-00 | MIP 16-00 | MIP 8-06 | MIP 16-06
Page 16 of 48 BA_MIP-8-16-0x.pdf | Technical improvements, changes in design, printing- and other errors reserved. | 2022-01-10
4.1.2. DVB-C, DVB-T or DVB-T2
Before connecting an antenna cable to a tuner, the LNB Power has to be set to Off!

Click TUNER 1…8/16 to select one tuner.

In the field LNB power choose the option Off .

Enter the center frequency (see table below) for the receiving channel into the field Freq (MHz).
Channel Input Channel Input Channel Input Channel Input
S 21 306 21 474 41 634 61 794
S 22 314 22 482 42 642 62 802
S 23 322 23 490 43 650 63 810
S 24 330 24 498 44 658 64 818
S 25 338 25 506 45 666 65 826
S 26 346 26 514 46 674 66 834
S 27 354 27 522 47 682 67 842
S 28 362 28 530 48 690 68 850
S 29 370 29 538 49 698 69 858
S 30 378 30 546 50 706
S 31 386 31 554 51 714
S 32 394 32 562 52 722
S 33 402 33 570 53 730
S 34 410 34 578 54 738
S 35 418 35 586 55 746
S 36 426 36 594 56 754
S 37 434 37 602 57 762
S 38 442 38 610 58 770
S 39 450 39 618 59 778
S 40 458 40 626 60 786
S 41 466
Note : The center frequeny of channels using a bandwith of 7MHz will be rounded down to 3 full digits. For example: center
frequency of CH 5 = 177.5 MHz, the according input = 177.
Note: All other entry fields are not relevant. Modulation and all other important parameter for reception are detected
automatically.
 If mutistreams are to be received, then the PLS mode must be set to root or gold. In addition, the correct Stream ID (three
digits) and the
PLS code
(six digits) must be entered.
 After all settings have been made, click SAVE & SCAN
.