2022-01-10 | Technical improvements, changes in design, printing- and other errors reserved. | BA_MIP-8-16-0x.pdf
Page 33 of 48
5.2.
OUTPUT
5.2.1.
Select transport stream output
Under TS OUTPUT, the type of transport stream and the number of transport stream packets are selected. Depending on the
configured transport stream, the output signals are output as MPTS (Multi Program Transport Stream) or as SPTS (Single
Program Transport Stream). You will configure in PHASE 2 and PHASE 3 according to your selection.
In the
Select TS Outbox
box, select MPTS or SPTS.
In the
TS packets per IP packet
field, select the number of TS packets.
Click SAVE & REBOOT.
The changes are made. The remaining time is displayed.
After rebooting log in again.
