Operation instructions | CMO 1-01 | CMO 2-01
10
2020-12-17 | Technical improvements, changes in design, printing- and other errors reserved.
3 Configuration
3.1 TCP/IP configuration
The TCP/IP protocol must be correctly installed and configured on your computer.
Select Start, then select Settings > Network and Internet.
Select Ethernet, then select the Ethernet network you are connected to.
Under IP Assignment, select Edit.
Under Edit IP Settings, select Automatic (DHCP).
Connect the Ethernet interface of your computer to the Ethernet interface of the CMO x-01. Use the
supplied Ethernet cable or a similar cable with RJ45 connectors.
3.2 Login to the CMO x-01
Open your web browser.
You may receive an error message because your computer is not connected to the Internet.
Type the default IP address of the CMO http://192.168.100.1 and press Enter.
Enter the following access data at the prompt:
Username: AXING_USER
Password: u$erPassw0rd (0 = zero)
Press Enter.
The Status page of the GUI is shown in the Browser (see 4.1.1 on page 11).
