2020-12-17 | Technical improvements, changes in design, printing- and other errors reserved.
9
2.2 Connections CMO 2-01
Connect the DATA connector (F-female) of the antenna wall outlet to the F connector of the CMO 2-01.
Use a highly shielded connection cable with F plugs.
Connect the supplied AC adapter to the DC connector of the modem.
Plug the power supply unit into the mains socket.
Switch on the cable modem.
The power LED lights up permanently.
During the boot process, several other LEDs are blinking.
After booting, the Downstream channel scan starts.
2.3 WiFi connection to CMO 2-01:
2.3.1.1
By entering WiFi name and password:
The factory WiFi name (SSID) and password (WPA Pre-Shared Key) are printed on the unit‘s nameplate.
Enter the SSID and password on your notebook, smartphone, or tablet.
2.3.1.2
By WPS button (WiFi Protected Setup, not compatible with Apple® devices):
Log in to the configuration interface as described later (http://192.168.100.1).
Go to the page
Wireless
>
Primary Network
.
On the right side of the page select in the drop down menu
Automatic Security Configuration
the option
WPS
.
Click
Apply
to enable the WPS function.
Press the
WPS button
on the CMO 2-01 for less than 5 seconds
The
WPS LED
starts to blink.
Connect your device to the cable modem. If necessary, follow the operating instructions of your device.
1
Press the WPS button more than 5 seconds will turn on or turn off WiFi.
