APPENDIX I
– INTERFACE DJPRO TO A FOX MKII
| APPENDIX I
– INTERFACE DJPRO TO A FOX MKII 73
TCP/IP COMMAND FROM RADIO AUTOMATION DJPRO TO FOX via ETHERNET LAN
OUTPUT
SWITCH EXECUTION
COMMAND
NOTE
DIGITAL OUT
INPUT A to DIGITAL OUT
$>IP:15000>DIGOUTSRC, INPUT_A
DIGITAL OUT
INPUT B to DIGITAL OUT
$>IP:15000>DIGOUTSRC, INPUT_B
DIGITAL OUT
INPUT C to DIGITAL OUT
$>IP:15000>DIGOUTSRC, INPUT_C
DIGITAL OUT
INPUT D to DIGITAL OUT
$>IP:15000>DIGOUTSRC, INPUT_D
DIGITAL OUT
INPUT AUTO to DIGITAL OUT
$>IP:15000>DIGOUTSRC, AUTO
Auto changeover
DIGITAL OUT
INPUT OFF to DIGITAL OUT
$>IP:15000>DIGOUTSRC, OFF
ANALOG OUT
INPUT A to ANALOG OUT
$>IP:15000>ANOUTSRC, INPUT_A
ANALOG OUT
INPUT B to ANALOG OUT
$>IP:15000>ANOUTSRC, INPUT_B
ANALOG OUT
INPUT C to ANALOG OUT
$>IP:15000>ANOUTSRC, INPUT_C
ANALOG OUT
INPUT D to ANALOG OUT
$>IP:15000>ANOUTSRC, INPUT_D
ANALOG OUT
INPUT AUTO to ANALOG OUT
$>IP:15000>ANOUTSRC, AUTO
Auto changeover
ANALOG OUT
INPUT OFF to ANALOG OUT
$>IP:15000>ANOUTSRC, OFF
IP = FOX IP ie: 192.168.99.75
Important Note:
With regard to the configurations DJPro CLASSIC and DJPro ENTERPRISE, in the case of the controls are used UDP
does not require any additional configurations in DJJ.INI which you are performing DIRETTA.EXE or DEONAIR.EXE.
In case you want to use the TCP / IP commands instead it is necessary to enable in the DJJ.INI that is performing
DIRETTA.EXE or DEONAIR.EXE the command TCP/IP. Just run the Enable flag leaving the other fields unchanged