DETAIL OF AUDIO CHANGEOVER REMOTER
| DETAIL OF AUDIO CHANGEOVER REMOTER
32
7.4 SECTION GP INPUTS AND GP OUTPUTS
In section GPInputs and GPOutputs are visible the status of the General
Purpose in Input and Output. The SubD 15poly HD female port on the back of
the device allows connections with the device. See the technical appendix for
connections and pinout. The purpose of this front panel is to show the status
of the various GP In and GP Out. The user cannot act to change the status of
the GP from this panel.
From the Fox front panel it is instead possible to see and learn the status of
the GP Inputs and GP Outputs by simply clicking the ANALOG or DIGITAL
key, and two lines show the status of
G-IN
:
0-0-0-0
G-OUT
: 0-0-0-0
7.5 DTMF GENERATOR AND DECODER SECTION
The DTMF Generator and Decoder section displays the three important Fox
operating parameters:
Alarm
,
DTMF Generator
and
DTMF Decoder
.
Alarm:
This alarm is displayed when the Fox working condition is alarmed; an
example could be when all the switchings available are terminated, and there are
no more input sources to send on an output available.
DTMF Generator:
this red indication represents the capacity of Fox to generate a
series of DTMF Tones, with user-customisable strings. The indication only represents
the ability of Fox to be able to generate DTMF tones, and not that Fox, when the
DTMF GENERATOR LED is lit, is generating DTMF tones. When the DTMF
Generator is ENABLED, this indication is lit. This control can be enabled or disabled
using Setup -> Settings. The subsequent chapters explain how to use in their entirety
the DTMF Generator and DTMF Decoder.
DTMF Decoder:
this red indication represents the capacity of Fox
to recognise a series of DTMF Tones, with user-customisable
strings. The indication only represents the ability of Fox to be able to
decode the DTMF tones, and not that Fox, when the DTMF
GENERATOR LED is lit, is decoding DTMF tones.
Essentially, when the DTMF Decoder is ENABLED this indication is
lit. This control can be enabled or disabled using Setup -> Settings.
The subsequent chapters explain how to use in their entirety the DTMF Generator and DTMF Decoder.