DETAIL OF AUDIO CHANGEOVER REMOTER
| DETAIL OF AUDIO CHANGEOVER REMOTER
33
7.6 SECTION SETUP AND DISCONNECT
This part includes all the technical work parameters of Fox and the operating configurations. This setup is, in turn,
divided into Tabs, each of these with specific functions:
TAB
FUNCTION AND SPECIFICATION
INPUT A
Management of the ANALOG Audio input Left + Right on XLR Balanced ( IN 1-A.)
INPUT B
Management of the ANALOG Audio input Left + Right on Balanced XLR ( IN 1-B )
INPUT C
Management of the DIGITAL Audio Input on Balanced XLR ( IN C )
INPUT D
Management of the DIGITAL Audio Input on Balanced XLR ( IN D )
OUTPUTS
Management of the DIGITAL and ANALOG Audio Output
SETTINGS
Here it is possible to configure both the DTMF Generator that Decoder, the functions of the
individual General Purpose Input and Output and the Delay line to be applied to a specific
input or output.
PROGRAM SETTINGS
Display and selection of the control software settings in addition to the information on the
connection, firmware code, firmware version and target name.
7.6.1 Description section Input -A Input -B (Analog Inputs)
The two Analog inputs of Fox are individually configurable with the various operating parameters shown below. In
addition to the usual controls of a classic audio device, there are also a number of very special features to make it a
superior category device with Fading Mode, Delay and Denoiser module. For these features for both the two analog
inputs there is ONLY ONE Input Tab because the two inputs are identical and a copy of each other.