DETAIL OF AUDIO CHANGEOVER REMOTER
| DETAIL OF AUDIO CHANGEOVER REMOTER
46
p.
SIGNAL C
: Only corresponds to the Audio-Detector of Input -C, this GPO goes to (1) when the source located
at input -C is considered valid.
q.
SIGNAL D
: Only corresponds to the Audio-Detector of Input -D, this GPO goes to (1) when the source located
at input -D is considered valid.
r.
SIGNAL AN OUT
: Corresponds to the Analog output, and the GPO goes to (1) when there is audio on the
Analog output.
s.
SIGNAL DIG OUT
: Corresponds to the Digital output, and the GPO goes to (1) when there is audio on the
Digital output.
t.
OFF
: GPO Off, not able to operate
u. ON
: GPO On, GPO continues to be enabled (1)
v. GPIN 2 MIRROR
: Performs the step from (0) to (1) depending on what is received on GPIN (in this example the
GPIN 2)
w.
DTMF FUN1 START PULSE:
This command performs a pulse of 300ms on the door GPOut (1 - 300 ms
duration) whenever the corresponding DTMF signal FUNCTION -1 makes a transition from 0 to 1.
x.
DTMF FUN1 STOP PULSE
:
This command performs a pulse of 300ms on port GPOut (0 - 300ms duration)
whenever the consideration DTMF signal FUNCTION -1 performs a transition from 1 to 0.
y.
DTMF FUN2 START PULSE:
This command performs a pulse of 300ms on the door GPOut (1 - 300 ms
duration) whenever the corresponding DTMF signal FUNCTION -2 makes a transition from 0 to 1.
z.
DTMF FUN2 STOP PULSE
:
This command performs a pulse of 300ms on port GPOut (0 - 300ms duration)
whenever the consideration DTMF signal FUNCTION -2 performs a transition from 1 to 0.
aa.
DTMF FUN3 START PULSE:
This command performs a pulse of 300ms on the door GPOut (1 - 300 ms
duration) whenever the corresponding DTMF signal FUNCTION -3 makes a transition from 0 to 1.
bb.
DTMF FUN3 STOP PULSE
:
This command performs a pulse of 300ms on port GPOut (0 - 300ms duration)
whenever the consideration DTMF signal FUNCTION -3 performs a transition from 1 to 0.
cc.
DTMF FUN4 START PULSE:
This command performs a pulse of 300ms on the door GPOut (1 - 300 ms
duration) whenever the corresponding DTMF signal FUNCTION -4 makes a transition from 0 to 1.
dd.
DTMF FUN4 STOP PULSE
:
This command performs a pulse of 300ms on port GPOut (0 - 300ms duration)
whenever the consideration DTMF signal FUNCTION -4 performs a transition from 1 to 0.
The DTMF command
FUNx START PULSE
and the DTMF command
FUNx STOP PULSE
: This is extremely important
when one needs to command the remote automation systems, whether they be television or radio and/or the control and
command of transmitters via remote telemetry, and one needs to have a command pulse of duration of 300ms, rather
than a command stable, which then resets after "n" time as for
DTMF FUNx