USE OF THE AUDIO CHANGEOVER REMOTER SOFTWARE
| USE OF THE AUDIO CHANGEOVER REMOTER SOFTWARE
27
5
USE OF THE AUDIO CHANGEOVER REMOTER SOFTWARE
Start-up window of the Fox command software
5.1 ACCESS VIA USB AND SERIAL CONNECTION
To be able to operate within Fox, after assigning the values of the
TCP/IP port via HybridAddress Manager, the AxelAudio Changeover
Remoter application must be used, launching it from the relevant
icon. Below the screen for the connection between Fox and PC
using USB Virtual serial port.
As can be seen, you are using a
COM5
USB connection port of the
PC from which you are working. The USB connection and the serial
connection are promptly run, once a Pin-to-pin serial cable or a A-B
type USB cable, both present within the Fox package, is connected;
simply click the
CONNECT
key and the panel for management of
the device will open.
Clicking the Connect key, the Audio Changeover Remoter enters into communication with Fox and all the information in
the memory of the device, the status and operation of the same will be displayed. The management panel changes
format and offers all the necessary checks for installation of the apparatus. The various controls are explained in detail in
the next few chapters .