TECHNICAL APPENDIX
| TECHNICAL APPENDIX
54
9
TECHNICAL APPENDIX
All the technical explanations and the connection pinouts to and from the Fox device are provided below. Always refer to
this technical appendix for the connections and connection procedures. Should you discover inconsistencies between the
documentation below and the hardware device please contact Axel Technology at the numbers and emails provided at
the end of this manual. Our technical and support department will be happy to help and support to the best of our ability!
9.1 APPENDIX A - BALANCED AUDIO CONNECTION AND PINOUT
Balanced Audio connection diagram on Balanced
XLR
for
Analog audio input and output (Left+Right) and
Input
and
Output
AES/EBU Digital Audio.
9.2 APPENDIX B - SERIAL DATA CONNECTION AND PINOUT
PORT 1
PORT 2,3,4
2
Tx
2
Tx
3
Rx
3
Rx
4
DTR
4
/
5
GND
5
GND
Connection to the pc requires a standard Pin-to-Pin serial cable. i.e. not CROSSED. For correct connection, the cable
length should not exceed 20m. Ports 2 and 3 only take the Tx, Rx and GND for connection to the PC, while port 1 also
supports the DTR (Data Terminal Ready) used for connection with a modem. The connection speed of the port must
coincide with the port speed both of the Fox and of the PC serial port
2
2
3
3
4
4
5
5
RS 232 Male
RS 232 Fem ale